Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Torrance Homeowners
A new Driveway Gate in Torrance typically costs between $2,800 and $9,500 installed, depending on the gate type, material, and whether the motor and safety equipment are part of the job. Most single swing gates run $2,800 to $5,200, while sliding gates and double driveway gates with automation land between $4,500 and $9,500. We give you a written price before any work starts, so the number you approve is the number you pay.
Vance Gate Repair Torrance has installed and serviced gates across the South Bay since 2014, when Adrian Vance started the company out of commercial access-control work. That background means every residential driveway gate we install gets the same documentation a commercial site would receive: a written scope, a written price, and a photo record of what was set and what was left behind. Call (424) 373-8425 and a live person answers, any hour, any day.
What Our Gate Installation Service Includes
Gate installation in Torrance covers more than hanging a gate on posts. It means setting the posts plumb, sizing the hinges for the gate’s weight, wiring the motor to code, and adjusting the safety edges and photo-eyes so the gate stops and reverses the way it should. Every installation ends with a written record of what was installed and a photo log of the finished work, under Haven Standard Clause 4.
Driveway Gate
A driveway gate is the main vehicle gate on the property, typically 10 to 16 feet wide, built from steel, aluminum, or wrought iron. In Torrance, driveway gates serve both privacy and security, and they need to be sized to the slope and set-back of the driveway so a vehicle can stop without blocking the sidewalk. We set the posts deep, hang the gate level, and if automation is part of the job, we wire the motor and safety loops before we leave.
Pedestrian Gate
A Pedestrian Gate is a smaller walk-through gate, usually 3 to 4 feet wide, installed alongside a driveway gate or as a standalone entry from the street. It gets used more often than the vehicle gate, so the hinges and latch carry daily wear. We install pedestrian gates with self-closing hinges and a latch that holds against wind, and we photograph the finished set before we pack up.
Sliding Gate
A sliding gate rides on a track or a cantilever system and moves horizontally instead of swinging out. Sliding gates work well on Torrance properties with short driveways or slopes where a swing gate would scrape or need excessive clearance. We install both track-style and cantilever sliding gates, and we check the roller alignment and end stops as part of the written record we leave with you.
Swing Gate
A swing gate opens inward or outward on hinges, either as a single leaf or a pair of leaves. Swing gates are the most common driveway gate type in Torrance residential neighborhoods, and their installation depends on the post footing depth and the weight of the gate leaf. We size the posts and hinges to the gate’s actual weight, not a guess, and we set the travel stops so the gate never over-travels into a car or a wall.
Double Gate
A double gate is two leaves that meet in the middle, used on wider driveways where a single leaf would be too heavy or too wide to swing safely. Each leaf needs its own post, its own hinge set, and on an automated double gate, its own operator or a master-slave motor setup. We install double gates with a center stop and a sequence that closes both leaves in the right order, then we photograph the limit settings for the record.
Security Gate
A security gate is built heavier than a typical residential gate, often with steel frame construction, welded infill, and a locking mechanism rated for forced entry. In Torrance, security gates are common on properties with alley access, detached garages, or street-facing yard entries. We install security gates with reinforced posts, a locking latch or maglock, and if you want it, an access control system with a keypad or intercom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and service LiftMaster gate operators more than any other brand in Torrance. LiftMaster’s residential swing and slide operators are common on South Bay homes, and we keep their photo-eyes, control boards, and remotes on the truck. We set the travel limits with the motor’s own programming procedure and record the force settings in the job file, so a future adjustment starts from a known number rather than a guess.
We also work on FAAC and Elite operators regularly. FAAC rams are common on heavier iron gates, where the hydraulic or electro-mechanical arm needs to be set to the gate’s exact leaf weight. Elite slide operators appear on many Torrance gates installed in the last decade, and we know the wiring well enough to match a new operator to an existing loop detector without ripping out the old conduit. Whether you have a Mighty Mule kit or any other make on the property, we will install around what is already there rather than steering you toward a replacement you do not need.
BeforeAfterSigns You Need Gate Installation Right Now
- The existing gate is rusted through at the hinge or the bottom rail. Surface rust can be sanded and painted. A hole through the frame means the gate’s structure is compromised, and in Torrance’s coastal air, it will keep spreading. A new gate costs less than a gate that falls off its hinges onto a car.
- The gate scrapes the driveway or no longer latches. A gate that scrapes is usually a post that has shifted or a hinge that has worn out. A gate that will not latch is a security issue, not a minor annoyance. When the post has moved, the fix is a new post footing and often a new gate sized to the corrected opening.
- You bought the house with no gate and you want one. A driveway gate adds a physical barrier at the property line, and in Torrance neighborhoods where package theft and alley access are concerns, a gate is the first layer of control. We will measure the opening, check the slope, and give you a written price for the gate and the motor together.
- The gate is too heavy for the existing opener. If the motor groans, trips its breaker, or opens the gate halfway, the gate and the operator are mismatched. Installing a lighter gate or a properly sized motor fixes the problem. We check the gate’s actual weight before we recommend either.
- The gate is a safety hazard. A gate without photo-eyes, without a reversing edge, or with a broken limit switch can close on a child, a pet, or a car. In Torrance, where driveways are short and sidewalks are close, a gate that does not reverse is a serious liability. We will not band-aid a gate that should be replaced when safety equipment is missing or failed.
Our Gate Installation Process - Step by Step
The process is documented because Adrian Vance’s background is commercial access control, where every setting is logged. We bring that same habit to residential gate installation in Torrance. Here is what happens.
- 1
Free site measure and written estimate. We come to the property, measure the opening, check the slope, look at the existing power, and photograph the site. We then write the price for the gate, the operator if you want one, and the labor as separate line items. You get that written price before you decide anything.
- 2
Post setting and gate fabrication or delivery. We set posts in concrete with footings sized to the gate’s weight, not a one-size-fits-all depth. For custom gates, we order or fabricate to the measured opening. For stock gates, we will bring the gate when the concrete has cured enough to hold it.
- 3
Gate hang and hardware installation. The gate is hung on hinges sized to the leaf weight, with the travel stops set so the gate stops where it should. We install the latch, the drop rod if it is a double gate, and the catch. The gate is adjusted until it moves by hand without binding.
- 4
Motor, wiring, and safety equipment. If the job includes automation, we mount the operator, run the conduit and wiring, and install the photo-eyes and safety edges. We set the travel limits and force settings using the manufacturer’s programming procedure, then record every setting in the job file.
- 5
Photo record and walkthrough. Before we leave, we photograph the finished installation, the wiring, the limit settings, and the safety equipment. We walk the gate through full open and close cycles with you there. You get a copy of the photo log and the written record of part numbers installed. That is the Haven Standard.
How Much Does Gate Installation Cost in Torrance?
Gate Installation pricing in Torrance runs from about $2,000 for a basic single pedestrian gate with no automation to $9,500 for a double steel driveway gate with an operator and safety equipment. Most single swing driveway gates with a motor land between $3,800 and $5,800. A sliding gate is usually $500 to $1,200 more than a swing gate because of the track or cantilever hardware. Here are the common scenarios with line items.
- Single swing driveway gate, no automation: $2,800 - $4,200 installed
- Single swing driveway gate with LiftMaster or Mighty Mule operator: $3,800 - $5,800 installed
- Double swing driveway gate with automation: $5,500 - $9,500 installed
- Sliding gate with automation: $4,500 - $8,000 installed
- Pedestrian gate, steel frame with latch: $2,000 - $3,600 installed
- Security gate with maglock or keypad access: $4,000 - $8,500 installed
What moves the price: gate material (steel costs more than aluminum), gate weight, whether the posts need to be replaced or new footings poured, the distance from the electrical panel to the operator, and whether safety loops need to be cut into the driveway. The estimate we give you is written, and the price is flat. No surprise invoice at the end. Under Haven Standard Clause 1, you will have the price in writing before any work starts.
Gate Installation Near Torrance - Our Service Area
We install gates throughout Torrance and the surrounding South Bay cities, including Redondo Beach, Gardena, Carson, Hawthorne, San Pedro, Inglewood, Long Beach, and as far north as Culver City and Venice. Most Torrance jobs are scheduled within a few days of the site measure. For a full list of what we do, visit our home page or read more about Gate Installation in Torrance.
Serving Torrance, CA - Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Torrance
Gate installation is the process of setting posts, hanging a gate leaf, and optionally wiring an automatic opener and safety equipment. It includes measuring the opening, sizing the hardware to the gate’s weight, and adjusting the gate until it moves without binding. At Vance Gate Repair Torrance, our Gate Installation in Torrance ends with a written price, a photo record, and a documented list of what was set.
A single swing gate with an operator is usually installed in one day. Double gates, sliding gates, or jobs that need new posts and concrete curing may take two to three days on site, with a short wait for concrete to reach strength before the gate is hung. We will tell you the schedule in writing as part of the estimate.
A basic pedestrian gate starts around $2,000, and a double steel driveway gate with full automation runs up to about $9,500. Most single driveway gates with a motor land between $3,800 and $5,800. The written estimate we give you after the site measure is the price, and it includes labor, hardware, and any safety equipment required. Call (424) 373-8425 for an exact quote.
Yes. LiftMaster residential swing and slide operators are the most common brand we install in Torrance, and we know their programming procedures and safety equipment well. If you already have a LiftMaster operator and want a new gate installed around it, we will match the new gate to your existing motor. We also work on FAAC, Elite, Mighty Mule, and other makes.
If a gate has failed and the property is unsecured, we treat it as an emergency. A live person answers our phone 24 hours a day at (424) 373-8425. Emergency installation means securing the opening first, often with a temporary gate or panel, then scheduling the permanent installation as fast as materials allow. We will not leave a home unsecured overnight.
Every gate installation we complete is covered by our 365-Day Done Right Promise. If the installation is not right within one year, we will make it right at no additional charge. No argument, no fee, no expiration date within that window. Manufacturer warranties on motors and operators apply separately and we will register them for you.
You do not need to do much. Clear the area around the gate opening so we have room to work, and make sure the electrical panel is accessible if we are running power to an operator. We handle the rest: measuring, post setting, wiring, and the final safety checks. If you have an existing gate, leave it in place until we arrive so we can match the new installation to the current opening.
Schedule Your Gate Installation Service in Torrance Today
Call (424) 373-8425 for a free site measure and a written estimate for gate installation in Torrance. You will get a flat price before any work starts, a photo record when we are done, and the 365-Day Done Right Promise on every installation. A live person answers, any hour, any day.
Written by Adrian Vance, Owner at Vance Gate Repair Torrance, serving Torrance since 2014.