Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate access control in Inglewood means keypads, card readers, phone entry, and video intercoms on gates that often date to the 1940s or 1950s, wired into panels never designed for the marine layer that sits over the city most mornings. We service the operator, the entry hardware, and the wiring between them, and we write the price down before any work begins. If your gate won’t open or the keypad stopped reading codes, call (424) 373-8425 and a live person answers.
Why Inglewood Homes Are Different
Inglewood’s gate stock is older than most of Los Angeles County’s, and it shows. Most driveways and pedestrian entries still have the original ornamental wrought iron installed when the post-WWII bungalows and 1940s-1960s multi-unit buildings went up. That iron has spent fifty to eighty years in coastal air sitting roughly five miles from the Pacific. The marine layer keeps humidity high and leaves a mild salt film on metal, so hinges corrode, welds crack at the pickets, and posts drift out of plumb. A gate in the San Gabriel Valley often fails from mechanical wear. A gate in Inglewood fails from oxidation first.
Then there’s the event calendar. SoFi Stadium and the Kia Forum can push 70,000-plus visitors into residential streets in a single weekend. Homeowners cycle their driveway gates open and closed for hours to keep event traffic from parking in front of the house. That concentrated cycling pattern, repeated weekends from August through February, burns out operator capacitors and hinge pins in a way neighboring cities never see. It also means Inglewood homeowners often can’t wait a week for a repair. The gate is doing a job on event days.
Our Main Inglewood Services
The two services Inglewood homeowners call about most are gate access control and gate parts and welding, and the three below each have a dedicated Inglewood page.
Gate Repair in Inglewood
Wrought iron that has stood since the Carter administration eventually needs more than lubricant. We find cracked welds, seized hinges, and sagging leafs on Inglewood’s older gates constantly, often worsened by the salt air and the weekend cycle bursts. Repairs start with a written diagnosis and a fixed price. Full details on scope and typical costs for Gate Repair in Inglewood are on that page.
Gate Installation in Inglewood
A new gate in Inglewood has to match the era of the house or the intent of the renovation. The SoFi-driven wave of upgrades means many homeowners want a modern automated gate on a 1950s driveway, or a replacement for iron too far gone to weld. We measure, quote, and handle the full install. Read specifics on Gate Installation in Inglewood.
Gate Motor & Opener in Inglewood
Motors in Inglewood fail differently than they do inland. The marine air corrodes connections, and event weekends push operators through more cycles in a month than most gates see in a year. We service all nine major brands and repair before we recommend replacement. Details on operators, brands, and typical repair ranges for Gate Motor & Opener in Inglewood are on that page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Inglewood
Gate access control in Inglewood usually means retrofitting keypads, card readers, phone entry, or video intercoms onto gates and posts installed fifty to seventy years ago, in air that never fully dries out. The equipment works, but the connections and mounting hardware corrode faster than they do inland, and event-weekend cycling adds load to the operator the access system commands. We install and repair the full chain: the entry device, the wiring, and the operator interface, with a written price before any work starts. Visit our Gate Access Control hub for the broader service detail.
Keypad Entry
Signs you need it
The keypad works intermittently, ignores codes after rain, or the housing is cracked and letting moisture into the board.
What it costs in Inglewood
Keypad replacement or installation in Inglewood typically runs $150 to $400 depending on whether we are wiring a new unit or swapping an existing one.
How we do it
We mount the keypad, run the low-voltage wiring to the operator, program the codes, and photograph the finished connections for your record.
Video Intercom
Signs you need it
The intercom crackles, the camera feed is fogged from trapped moisture, or the call function stopped reaching the house phone or app.
What it costs in Inglewood
Video intercom installation in Inglewood generally runs $400 to $1,200 depending on wiring distance and whether we run new cable or use existing conduit.
How we do it
We surface the intercom station, pull or re-terminate the wiring, pair the unit with your phone or inside monitor, and leave a photographed wiring diagram.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad entry | $150 - $400 |
| Phone entry system | $400 - $900 |
| Video intercom | $400 - $1,200 |
How much does a keypad cost in Inglewood?
A keypad itself is usually $150 to $400 installed on an existing operator. If we have to cut into stucco or post-mount on the street side, that adds labor. Call (424) 373-8425 for a written quote.
Can you come today for access control work?
For access control repairs in Inglewood, we dispatch as fast as the same day when the gate won’t open at all. New installations are measured, quoted, and scheduled. Call (424) 373-8425 and a live person answers.
Gate Parts & Welding in Inglewood
Gate parts and welding in Inglewood often means saving an original wrought iron gate rather than replacing it, in a climate where salt air and the marine layer attack every exposed weld and hinge. Homeowners doing SoFi-era renovations want the iron kept, not scrapped. We cut out cracked sections, weld new material in, replace hinges and rollers, and leave a photo record of every repair. See our Gate Parts & Welding hub for the full scope.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the hinge pin has play, or the leaf is sagging enough to catch the driveway.
What it costs in Inglewood
Hinge replacement in Inglewood typically runs $180 to $450 per gate depending on iron thickness and whether the post needs reinforcement.
How we do it
We cut or unbolt the old hinge, weld or bolt the new one in place, rehang the leaf, and photograph the alignment before we leave.
Custom Welding
Signs you need it
Pickets are cracked at the welds, a section is rusted through, or the gate frame has a split that makes the leaf flex when it cycles.
What it costs in Inglewood
Custom welding repair in Inglewood usually runs $150 to $600 depending on how many sections need cutting and re-welding and whether we repaint the repaired area.
How we do it
We grind out the cracked weld, fit new stock where needed, weld it in, and give you a photographed record of the repair with the part numbers of any hardware replaced.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement | $180 - $450 |
| Post replacement | $400 - $900 |
| Custom welding repair | $150 - $600 |
Can you weld a cracked wrought iron gate in Inglewood?
Yes, most cracked wrought iron gate frames and pickets can be welded in place without removing the gate. We grind, weld, and repaint the section. Call (424) 373-8425 for a written price.
How much does a gate hinge replacement cost in Inglewood?
Hinge replacement runs $180 to $450 per gate depending on access and iron thickness. If the post is rotted or out of plumb, that is quoted separately before work starts.
Brands We Service in Inglewood
We service the operator brands most common on Inglewood gates: LiftMaster, FAAC, Elite, and Mighty Mule, among the nine we carry parts for. Common boards, remotes, and limit switches are stocked locally, so most brand-specific repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Gate repair diagnostic | $75 - $150 |
| Gate repair (minor, same visit) | $120 - $350 |
| Gate repair (major) | $350 - $800 |
| Access control – keypad | $150 - $400 |
| Access control – phone entry | $400 - $900 |
| Access control – video intercom | $400 - $1,200 |
| Hinge replacement | $180 - $450 |
| Custom welding repair | $150 - $600 |
| Gate operator repair | $180 - $500 |
Prices in Inglewood run slightly higher than inland because the marine layer accelerates corrosion, and older iron often hides damage until the gate is opened up. Whatever the number, it is written down and agreed before any work begins, under our Haven Standard.
Neighborhoods We Serve in Inglewood
We work the full Inglewood grid, from the streets around SoFi Stadium to the quieter bungalow blocks east of Prairie Avenue. Response time is typically within one to two hours for emergency calls anywhere in the city, with same-day scheduling for most repairs.
- North Inglewood
- Morningside Park
- Century Boulevard corridor
- Larchmont area
- East Inglewood
Service Area - Cities Near Inglewood
We also serve the neighboring cities where Inglewood clients often send friends and family. That includes Hawthorne, CA, Culver City, CA, Gardena, CA, and Los Angeles, CA.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
Yes. We know Inglewood gates work hardest when SoFi or the Kia Forum is running an event, and we dispatch on weekends and evenings. Call (424) 373-8425 and a live person answers, even during a game.
Repairs to existing gates, including welding and operator replacement, typically do not require a permit in Inglewood. New installations and posts set in concrete may, and we flag that before quoting. Your written price reflects any permit-driven scope.
For a gate stuck open or a security gate that won’t close, we aim for one to two hours anywhere in Inglewood. Same-day service is standard for most repair calls. New installs are measured and scheduled, never rushed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.